Kiiltomelt PS 300
Hot melt adhesive
Kiiltomelt PS 300 is an unfilled EVAC-based hot-melt adhesive for profile coating.
Special features
- M1 Classification
Links
Materials
Kiiltomelt PS 300 is an unfilled profile coating hot-melt adhesive, which can be used for back reinforced veneer or different types of paper foils. Adhesive is compliant with M1 Emission Classification of Building Materials.
Package Size | Product Code |
---|---|
Kiiltomelt PS 300 10 kg | T7304.010 |
Kiiltomelt PS 300 400 kg Bigbag | T7304.500 |
beige
85 °C (DIN 52011)
6 500 mPas, 180 °C, 5 s¯¹
+18 - 22 °C
160 -185 °C (on the applicator roll)
20 kg, 400 kg
60…70 %
7 - 10 %
In unopened containers, at max. +40 °C, for 36 months
The adhesive is melted in the adhesive tank. The feed speed of the machine is 15–40 m/min. If the feed speed is lower than recommended, the adhesive temperature on the applicator roll must be raised in order to prevent the adhesive from cooling prematurely. For longer breaks in the work the adhesive temperature should be decreased, otherwise the adhesion and flowing properties of the adhesive may weaken.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.
Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.