Kiilto Pro Construct
Construction adhesive
Ideal for fixing mineral wool, styrox and acoustic panels and different types of soft boards on walls and ceilings.
Good initial tack.
Special features
- excellent initial tack
- off-white
- coverage 1–2 m²/l, if applied in dots, even 4 m²/l
- suitable materials:
acoustic panels
gypsum boards
renovation gypsum panels
halltex or similar interior cladding panels
Links
Materials
Special adhesive with good initial tack for the gluing of insulation and acoustic panels as well as different types of soft panels on walls and ceilings.
Package Size | EAN Code |
---|---|
1 l | 6411511022018 |
3 l | 6411511022032 |
10 l | 6411511022100 |
15 l | 6411511022155 |
+18-25 °C
Approx. 1–2 m2 depending on the substrate, glued material and gluing method.
1.5 kg/l
not stable (frost-resistant adhesive joint)
1 l, 3 l, 10 l, 15 l
In unopened containers, above +1°C, for 18 months. After long storing, stir before use.
concrete: max. 4 % by weight or below 90 % RH
If the air humidity is very high, the curing process will be slower and problems may occur.
15–25 min.
late wet bonding:
Suitable substrates are concrete, masonry, building board, painted surfaces (moisture resistant) and most plastics (excl. PE, PP or PTFE). The substrate must be dry and free of dust. Depending on the texture and weight of the material, apply adhesive in dots in 8–10 cm wide strips or on the entire surface so that the board edges are evenly covered with the adhesive. Once applied, press the board onto the substrate immediately. We advise you to place the first panel 5–10 cm off its final position and then slide it firmly to the intended place and tap into position. The adhesive has good initial tack, so no additional support is usually needed, not even with inverted applications. The bond acquires its final strength within 1–5 days depending on the prevailing conditions. Do not try to accelerate the drying via artificial means.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.